Your Nintendo Switch is probably filthy. Since the Switch pulls double duty equally a shared family unit console and a handheld gaming console, it has extra opportunity to get dirty fingers all over it. Here's how to make clean all the parts of your Switch without getting it wet or ruining information technology.

Co-ordinate to Nintendo's official support page, you lot should avert submerging your Switch in h2o (duh), using any cleaning solvents, or putting water direct on the screen. Instead, to make clean your Switch, you'll demand a few non-destructive materials:

RELATED: How to Clean Your Dingy Smartphone (Without Breaking Something)

  • A microfiber screen cleaning cloth. This comes upwards every time we talk near cleaning gadgets, and with good reason. A microfiber cloth tin can clean your screen without leaving scratches or lint.
  • Cotton swabs or pads. We'll utilise a few cotton fiber swabs to clean some of the harder to reach crevices.
  • A small loving cup of water. While you don't want to pour water directly on your switch, you lot may need to lightly dampen a cotton fiber swab. Become a small-scale glass of h2o that yous tin can dip into.

If you don't accept a microfiber cleaning material, you can substitute with a soft t-shirt or other piece of fine threaded fabric. Just be sure not to utilize a bigger fluffy towel that tin get out more than lint than yous clean off.

Wipe Downwards Your Main Panel and Screen With a Microfiber Cloth

The touch screen on your Switch can end upwards just as smeared with fingerprints as your phone. Having a microfiber cloth can come up in handy for this. Microfiber cloths are designed to avoid scratching screens and exit no extra lint. To make clean your screen, merely wipe the cloth across the surface of the screen in long strokes. Don't use round motions, as this tin take hold of dirt particles and rub them over the screen.Never utilise cleaning products on the Switch screen. If you accept any caked on gunk, very lightly dampen the cloth with water when yous wipe information technology off. Be sure to clasp out any h2o so it doesn't leave drops that can find their mode into cracks between the screen and the case.

If you don't already have ane, it may exist a good thought to get a screen protector—yous tin usually get ane for less than $10. In addition to the normal wear and tear that screens normally get through, the Switch as well gets placed into an HDMI dock. This shouldn't be a problem if y'all identify it in gently, but if you're also rough with it (or if a child uses the dock) you can end upward scratching the screen on the dock itself. A screen protector should solve this problem, as well every bit keep your device looking good through normal employ.

Scrub the Joy-Con Controllers With a Damp Fabric

The Joy-Con controllers on your Switch will go a ton of gross gunk all over them as your kids play in the back seat while sloppily eating chips and spilling Coke on their fingers. At least they're quiet, though. To clean the controllers, y'all can whip out that handy microfiber cloth once again. This time, though, get it a footling damp. Squeeze out any excess h2o until information technology'southward not dripping any more, and then squeeze it a trivial fleck more. Then, scrub the plastic of your controller with the fabric.

Utilise a Cotton Swab to Reach the Difficult-to-Clean Spots

Some spots on the Switch may be a little too difficult to achieve with your microfiber cloth. In those cases, some cotton wool swabs can come in handy. The metal sides of the Switch where the controllers latch in, or the USB-C port on the bottom are nesting grounds for dust and dirt that can jam up the parts of your panel.  Rub the swab along the within, or in between the small crevices. If in that location is gunk built up, you lot may need to dip the cotton in water, simply retrieve to make sure y'all squeeze whatever excess out before you put the cotton into any ports or cracks. Even a pocket-size drop of water could enter the console and cause a short, then don't use water unless you absolutely have to and, even and so, use information technology very sparingly. Requite your whole panel another once over to wipe downward all the parts you may have missed, similar the speaker grill or underneath the kickstand on the back.

If you wipe off the parts of your Switch that encounter the most employ regularly, so you shouldn't need to do as well much hardcore cleaning. There's a lot of opportunity to get clay and grease all over your Switch, but it only takes a few seconds to wipe the whole thing down and keep it looking shiny and new.

The above article may contain chapter links, which help support How-To Geek.